• Neuf
  • General
  • ShellMetal material
  • Net Weight1.8 kg (4.0 lb)
  • Gross Weight3.0 kg (6.6 lb)
  • Dimensions (W × H × D)335.00 mm × 44.50 mm × 226.00 mm (13.19'' × 1.75'' × 8.90'')
  • Operating Temperature0 °C to 45 °C (32 °F to 113 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply100-240 VAC, 50/60 Hz, Max. 2.5 A
  • Installation ModeRack (equipped with mounting ears)
  • Max. Power Consumption150 W
  • Power Consumption In Idle10 W
  • Surge Protection6 KV
  • Network Parameters
  • Ports16 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port
  • MAC Address Table16 K
  • Switching Capacity7.2 Gbps
  • Packet Forwarding Rate5.36 Mpps
  • Internal Cache4 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power PinEnd-span: 1/2(-), 3/6(+),8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortPoE: Ports 1 to 16
  • Max. Port Power30 W
  • PoE Power Budget130 W
  • Software Function
  • Long Range

    Ports 1 to 16: up to 300 m.

    Long range performance may vary depend on camera model or cable condition.

  • VIP PortPorts 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
  • Link Aggregation

    Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

    Support static link aggregation.

    Support 1 aggregation groups.

  • Port Isolation/
  • HPP

    Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

    1. Display the port rate.

    2. Display the port bandwidth utilization rate.

    3. Display the PoE power usage.

    4. Display topology information.

    5. Display the alarm status.

    6. Restart ports and devices.

    7. Enable port long-rage mode.

    8. Remotely upgrade the device.

  • PoE Watchdog/
  • System Maintenance

    Support device management via web.

    Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.

    Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.

    Support management via Hik-Central Pro.

    Support remote management via Hik-Partner Pro.

    Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.

    Supports 802.1ab LLDP for peer device discovery.

    Support SNMP v1/v2c for third-party management platform access.

    Support port mirroring for fault locating.

  • QoS/
  • Storm Control

    Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.

    Supports port rate limiting based on broadcast, multicast, and unknown unicast packets.

  • DHCP Snooping

    DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through

    Off by default.

  • Loop Prevention/
  • VLAN/
  • Port Rate-Limiting/
  • IGMP Snooping/
  • ACL/
  • IPSG/
  • Approval
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
  • SafetyUL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • ChemistryCE-RoHS (2011/65/EU)
DS-3E1318P-EI/M

Téléchargement

DS-3E1318P-EI/M

Téléchargement (795.23k)

16 autres produits dans la même catégorie :